Drop your SWOOD .xlsm — boards auto-created from materials. Reads PARTLIST (SA_GA_VIRT / RIMANTE_ZAB format) with edgebands & QR op IDs from LABEL sheet automatically.
Drag parts · Right-click → Zebra label with QR · DXF export for vCarve
📋
Parts Manager
× Multiply all by
Part name ↕
L mm ↕
W mm ↕
Rot
Mach
Qty ⤢
Area m² ↕
Thickness
Material ↕
Edgebands
QR/CNC
Group
Rotation:
Machine:
Assign selected to group:
📐
Import DXF parts
Each DXF becomes a shaped part. Nesting uses the bounding box; the real outline is drawn and exported for vCarve.
🔍
DXF inspector
part · cut-out · sheet · ignored
⤢
Extract parts from layout
📐
Assign DXF shapes to parts
📋
Import part list (CSV)
Material mapping
Keep each CSV material as-is, or remap to an existing board. New materials get a default 2800×2070 board created automatically.
🗂
Project history
🪵
Dėdės Baldai
Nesting & cut optimization
🔒
Dėdės Baldai
Prisijunkite, kad tęstumėte
♻
Reusable offcuts (scrap)
The largest clean rectangle left on each sheet, after all parts and saw kerf. Export a label to stick on the offcut, and a DXF of its position & size for tracking or re-nesting later.
🔗
Merge narrow parts
Parts with one dimension ≤150 mm are merged into strips up to 800 mm wide, with a saw-kerf gap between pieces. Same length, material, and thickness required to merge. The cutting operator separates them with a single saw cut along each gap.
Assign parts to group
Set how many copies of each part go into this group. Split identical parts across several groups — e.g. 6 facades → 2 + 2 + 2. Grouped parts keep the same grain direction (no rotation) and are placed consecutively.
